Timers
Pulse Timer
Description Note that the output timing accuracy is limited by the timebase.
Availability
  • Available only in the dw2xx series products
  • Requires library: Process Control (option -05)
  • Firmware versions 0x2000 and later
savvy-SFD Graphic pulseTimer
Graphic with Parameters pulseTimer

Parameters

Start Input, Read-write, Boolean (signed 16-bit integer)
0 = Low
1 = High
Pulse Time Input, Read-write, Analog (unsigned 16-bit integer)
0.1 s to 6000.0 s
Elapsed Time Internal Parameter, Read-only, Set to default on hard initialization, Analog (unsigned 16-bit integer)
0.0 s to 6000.0 s
Output Output, Read-only, Set to default on hard initialization, Boolean (signed 16-bit integer)
0 = Low
1 = High
Hold Input, Read-write, Boolean (signed 16-bit integer)
0 = Low
1 = High
Reset Input, Read-write, Boolean (signed 16-bit integer)
0 = Low
1 = High