ModbusRTU Master
Comms Monitor
Description (description coming soon)
Availability
  • Available only in the dw2xx series products
  • Requires library: System & I/O
  • Requires: Modbus Master
  • Firmware versions 0x2013 and later
savvy-SFD Graphic mbmCommsMonitor
Graphic with Parameters mbmCommsMonitor

Parameters

Modbus Address Internal Parameter, Read-write, Analog (signed 16-bit integer)
1 to 247

The Modbus RTU address of the slave device on the EIA-485 network.
Status Output, Read-only, Enumerated (signed 16-bit integer)
-1 = Inactive
0 = OK
1 = Fault