Ramps
Linear Ramp
Description (description coming soon)
Availability
  • Requires library: Process Control (option -05)
  • Firmware versions 0x100A and later
savvy-SFD Graphic linRamp
Graphic with Parameters linRamp

Parameters

Input Input, Read-write, Analog (signed 16-bit integer)
-327.67 % to 327.67 %
Ramp Time Input, Read-write, Time or Rate (signed 16-bit integer)
0.1 s to 3000.0 s

Minimum time for the ramp to go from 0% to 100%
Hold Enable Input, Read-write, Boolean (signed 16-bit integer)
0 = Inactive
1 = Hold
Reset Enable Input, Read-write, Boolean (signed 16-bit integer)
0 = Inactive
1 = Reset
Output Output, Read-only, Set to default on hard initialization, Analog (signed 16-bit integer)
-327.67 % to 327.67 %
State Output, Read-only, Boolean (signed 16-bit integer)
0 = Not Ramping
1 = Ramping